Polk Audio
›

PS Audio PerfectWave Power Cables

hochpt21hochpt21 Posts: 5,177
in 2 Channel Audio
I am currently running a SignalCable PC in my system. I have no complaints. This may just be an itch to 'upgrade' for snickers and giggles.

Music Direct currently has the PerfectWave PC's on sale. The AC3 is what I am thinking. The AC5 is slightly out of my budget. (budget around $100)

Does anyone have experience with either of the two models?

This will be running directly from a dedicated 20a outlet to my Musical Fidelity A308 integrated amplifier.

Thanks,
Paul
__________________________________________________
2 Channel
Turntable - VPI Scout 1.1/Ortofon 2M Blue
Integrated Amplifier - Rogue Audio Cronus Magnum II
Speakers - GoldenEar Triton 2
__________________________________________________
7.1 Home Theater
Denon AVR-X3300W; Rotel RMB-1066; Polk CS350ls, LS90's, FXi3's, RC60i; SVS PC Ultra; BenQ W1070; Elite Screens 120"
__________________________________________________
Man Cave
Turntable - 1) Pro-Ject 2.9 Wood/Grado Gold; 2) Sony PS LX410/Grado Green
Phono Stage - PS Audio GCPH, Parks Audio Budgie; CD - Marantz DV4001
Preamp - Dared SL2000a, Luminous Audio Axiom II; Amplifier - Parasound HCA-1500A
Speakers - SDA 2A (x-overs etc...); Epos Epic 2; Polk Audio Monitor 70 (my first)
__________________________________________________
· Share on Facebook
«13

Comments

  • NightfallNightfall Posts: 7,960
    No experience, but.... Do it! Get one of the PS Audio outlets too. B)
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
    · Share on Facebook
  • pitdogg2pitdogg2 Posts: 13,992
    I have several bit not that model...selling point for me ...removable ground pin...
    · Share on Facebook
  • [Deleted User][Deleted User] Posts: 91
    I have exactly 3 days of experience.
    Bought one when they we $89.00 for a minute.
    Bought the detect power center as well when it
    was on sale.

    I have signal on everything else except a couple three
    Pangea cords.(one for the sub, one for the AVR and one
    is "currently" feeding the detect. I have to have it this
    way until I get around to running a ground to the nearest
    outlet and installing a power port classic plug.

    Results? Slight. My amp is dead silent except when using
    the TT to begin with.

    Anyway, more work to do.
    Studio 2 equipment;
    Yamaha a-s2100 Amp, CD-2100 CD player, T-S500 tuner
    Loudspeakers: Harbeth p3esr, Polk RT7
    Cables: Aural Harmony Sonnet Interconnect II, WireWorld Equinox 7 speaker,
    Black Cat silverstar 75 ohm digital, Signal Digital Power Cord, PS Audio Perfect Wave AC-3,
    Pangea SE14, Voltz supplied interconnects
    Optional: Arcam DV88 DVD/CD (HDCD) player, Polk SDS-400 speakers
    · Share on Facebook
  • pitdogg2pitdogg2 Posts: 13,992
    I also see the Diamond back interconnects on sale going to get me some of those. I should of never sold mine....
    · Share on Facebook
  • EndersShadowEndersShadow Posts: 16,755
    I've not hear anything bad about them.. They were a front runner for me over the Wireworld stuff I've got and I may kick around one myself just for giggles.

    @F1nut uses them exclusively IIRC....

    The ONLY drawback is I'm going to guess they are quite stiff similar to Pangea cables so you really do need an extra .5 to account for any bends.
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
    · Share on Facebook
  • honestaquarianhonestaquarian Posts: 2,476
    They are considerably more expensive,but the Shielded power cables from The Upgrade Company actuallly make a HUGE difference.
    I was shocked at what I heard.
    Living room Home theater: Upgrade Company modified Onkyo PR-SC5509,Sunfire Cinema grand Signature 5 channel amp(1st gen),Carver TFM-45,Carver M-400a,Panasonic TC-P50ST60 50" Plasma(last gen before Plasma production stopped)Pioneer Elite DVL-91,Meridian 519 Dolby AC-3 RF Demodulator,Oppo Digital UDP-205,TiVo Bolt VOX,Nakamich BX-300,Technics SL-1200MKII,Shure V15 Type VxMR cartridge,Polk SDA-SRS 3.1 TL(with RD-0198 tweeters, upgraded with Larry's rings, black hole5,an Avel-Lindberg 1000VA isolation transformer, VR3 customer crossovers and internal wiring),Polk CS-1000P(with SL-6506 tweeter),Polk Monitor 5jr(with RD-0194 tweeters),Polk RT-35i (1),Polk Mini Monitors,Polk PSW150(4)Monster Power HTPS 7000 MKII Signature series,Monster Power AVS 2000 Signature Series,Various MIT,Monster,Upgrade Company and Belden interconnect,power,HDMI,Coax and Toslink Digital and speaker cables.

    Bedroom 2 channel system:Integra DTM 40.4,Nakamichi BX-100,TiVo mini,Musical Fidelity X-LPS,X-PSU,Carver TFM-25,Sony KV-34XBR970(last of the widescreen tube sets before production stopped)Technics SL-1200MKII,Shure V15 Type V MR cartridge,Polk RT-55(with SL-6506 tweeters),Polk PSW-200 in plexiglass(2),Sony Playstation 3 slim.Monster Power HTPS-7000,Monster AVS-2000, PowerVarious Kimber,Audioquest and MIT interconnects and speaker cables.
    · Share on Facebook
  • honestaquarianhonestaquarian Posts: 2,476
    See the pic in the my thread about them
    Living room Home theater: Upgrade Company modified Onkyo PR-SC5509,Sunfire Cinema grand Signature 5 channel amp(1st gen),Carver TFM-45,Carver M-400a,Panasonic TC-P50ST60 50" Plasma(last gen before Plasma production stopped)Pioneer Elite DVL-91,Meridian 519 Dolby AC-3 RF Demodulator,Oppo Digital UDP-205,TiVo Bolt VOX,Nakamich BX-300,Technics SL-1200MKII,Shure V15 Type VxMR cartridge,Polk SDA-SRS 3.1 TL(with RD-0198 tweeters, upgraded with Larry's rings, black hole5,an Avel-Lindberg 1000VA isolation transformer, VR3 customer crossovers and internal wiring),Polk CS-1000P(with SL-6506 tweeter),Polk Monitor 5jr(with RD-0194 tweeters),Polk RT-35i (1),Polk Mini Monitors,Polk PSW150(4)Monster Power HTPS 7000 MKII Signature series,Monster Power AVS 2000 Signature Series,Various MIT,Monster,Upgrade Company and Belden interconnect,power,HDMI,Coax and Toslink Digital and speaker cables.

    Bedroom 2 channel system:Integra DTM 40.4,Nakamichi BX-100,TiVo mini,Musical Fidelity X-LPS,X-PSU,Carver TFM-25,Sony KV-34XBR970(last of the widescreen tube sets before production stopped)Technics SL-1200MKII,Shure V15 Type V MR cartridge,Polk RT-55(with SL-6506 tweeters),Polk PSW-200 in plexiglass(2),Sony Playstation 3 slim.Monster Power HTPS-7000,Monster AVS-2000, PowerVarious Kimber,Audioquest and MIT interconnects and speaker cables.
    · Share on Facebook
  • hochpt21hochpt21 Posts: 5,177
    rednedtugent wrote: »
    I have exactly 3 days of experience.
    Bought one when they we $89.00 for a minute.
    Bought the detect power center as well when it
    was on sale.

    I have signal on everything else except a couple three
    Pangea cords.(one for the sub, one for the AVR and one
    is "currently" feeding the detect. I have to have it this
    way until I get around to running a ground to the nearest
    outlet and installing a power port classic plug.

    Results? Slight. My amp is dead silent except when using
    the TT to begin with.

    Anyway, more work to do.

    Yea the A3 is $89 now.
    __________________________________________________
    2 Channel
    Turntable - VPI Scout 1.1/Ortofon 2M Blue
    Integrated Amplifier - Rogue Audio Cronus Magnum II
    Speakers - GoldenEar Triton 2
    __________________________________________________
    7.1 Home Theater
    Denon AVR-X3300W; Rotel RMB-1066; Polk CS350ls, LS90's, FXi3's, RC60i; SVS PC Ultra; BenQ W1070; Elite Screens 120"
    __________________________________________________
    Man Cave
    Turntable - 1) Pro-Ject 2.9 Wood/Grado Gold; 2) Sony PS LX410/Grado Green
    Phono Stage - PS Audio GCPH, Parks Audio Budgie; CD - Marantz DV4001
    Preamp - Dared SL2000a, Luminous Audio Axiom II; Amplifier - Parasound HCA-1500A
    Speakers - SDA 2A (x-overs etc...); Epos Epic 2; Polk Audio Monitor 70 (my first)
    __________________________________________________
    · Share on Facebook
  • motorhead43026motorhead43026 Posts: 3,245
    I sure wish I had purchased another PS Detect when these were half price. The A3 for $89.00 is a bargain. I also purchased one of these for use with the Detect. This PS Audio stuff is quality job one.
    2 channel: Anthem 225 Integrated amp; Parasound Ztuner; TechnicsTT SL1350; Vincent PHO-8 phono pre; Marantz CD6005 spinner; Polk SDA2BTL's; Cables ZU Mission IC's, SC and power cords, all into a PS Audio Dectet Power center.

    All TV's sound enhanced by Polk Magnfi Mini's.

    Other; S60'S, M10 series II, M7C's, Hafler XL600 amp, RB-980BX, Parasound HCA-1500 amp , P5 preamp, all in storage. All speakers have had crossover rebuilds, resulting in a small fortune invested in Sonicaps, and tweeter upgrades.

    Political memes posted as fact and accepted as fact, are sign language of the ignorant, for the ignorant

    tonyb said " but even socialists can do a good thing here and there

    Social media makes dumb people dumber and smart people dumb then dumber.
    · Share on Facebook
  • mrbironmrbiron Posts: 5,098
    I have 3 AC3s and a fourth being delivered tomorrow. I like them a lot and don't be worried about flexibility, you could make a pretzel if you wanted.

    They all plug into my PS audio Upc 200 power conditioner.

    Definitely want to try a PS audio outlet for $50 and when costs prohibits, I want to try a regenerator. (Long-term goal)

    PS Audio has my heart....
    Zu Audio Omen MK-1B's, Peachtree Decco65, Bryston BDA-2, Cheap TT, PS Audio UPC200, PS Audio AC3's, Zu Mission SC's, HTPC, One, Bottlehead Crack w/Speedball, Senn's MD HD600
    · Share on Facebook
  • BetaBeta Posts: 263
    Big fan of PS Audio here. All my power cords are AC 5s. I use a Soloist Premier SE in-wall conditioner. An AC 5 runs from the Soloist to a Power Plant Premier regenerator. From the PPP I run AC 5s to each component. My PPP died a few years back. I sent it to PS Audio and they repaired it for free. They paid for all shipping as well. Great customer service (YMMV). I purchased a APC H15 to replace the PPP while it was being repaired. It wasn't until I placed the PPP back into my system that I was reminded how significant of a positive improvement it made. I was truly amazed at the difference. At any rate, if the AC 3 is similar to the AC 5, the only challenge I have with the AC 5 is its lack of flexibility.
    · Share on Facebook
  • EndersShadowEndersShadow Posts: 16,755
    mrbiron wrote: »
    I have 3 AC3s and a fourth being delivered tomorrow. I like them a lot and don't be worried about flexibility, you could make a pretzel if you wanted.

    Prove it :wink:
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
    · Share on Facebook
  • mikeyb128mikeyb128 Posts: 2,886
    I have 3 ac3's in my theater, great cable! I heard a significant difference in sound when adding one to my amp. I use signal magic cables for my mono blocks down stairs, they are way to stiff, but haven't got the itch to upgrade them... Or maybe I do... Oh shot! Ahhhhhh!
    2 channel:
    Bryston 4B3, Bryston BDA3, Cary SLP05, Shanling CDT1000SE with parts conneXion level 2 mods, Nottingham analogue ace space 294, soundsmith Carmen MKii, Zu DL103 MKii, Ortofon MC 20 MKii, Dynavector XX2 MKii, Rogue Audio Ares, Core power technologies balanced power conditioner, Akiko Corelli power conditioner with Akiko Audio HQ power cable, Nordost heimdall 2, Frey 2, interconnects, speaker and power cables, Focal Electra 1028 BE 2, Auralic Aries Femto, Black diamond racing cones, ingress audio level 1 roller blocks, JL Audio E110 with Auralic subdude, Primacoustics room treatments.
    Theater:
    Focal Aria 926,905,CC900, SVS PB ultra x2. Pioneer Elite SC85, Oppo BDP93, Panamax M5400PM, Minix neox6, Nordost Blue heaven LS power cables.

    · Share on Facebook
  • [Deleted User][Deleted User] Posts: 91
    Yes, the AC-3 ended up on the amp for me...
    Studio 2 equipment;
    Yamaha a-s2100 Amp, CD-2100 CD player, T-S500 tuner
    Loudspeakers: Harbeth p3esr, Polk RT7
    Cables: Aural Harmony Sonnet Interconnect II, WireWorld Equinox 7 speaker,
    Black Cat silverstar 75 ohm digital, Signal Digital Power Cord, PS Audio Perfect Wave AC-3,
    Pangea SE14, Voltz supplied interconnects
    Optional: Arcam DV88 DVD/CD (HDCD) player, Polk SDS-400 speakers
    · Share on Facebook
  • EndersShadowEndersShadow Posts: 16,755
    mrbiron wrote: »
    I have 3 AC3s and a fourth being delivered tomorrow. I like them a lot and don't be worried about flexibility, you could make a pretzel if you wanted.

    They all plug into my PS audio Upc 200 power conditioner.

    Definitely want to try a PS audio outlet for $50 and when costs prohibits, I want to try a regenerator. (Long-term goal)

    PS Audio has my heart....

    Yeah I've got 3 of em I bought off someone here for 75 bucks on the way. 2 for the HT, one for the office.
    mikeyb128 wrote: »
    I have 3 ac3's in my theater, great cable! I heard a significant difference in sound when adding one to my amp. I use signal magic cables for my mono blocks down stairs, they are way to stiff, but haven't got the itch to upgrade them... Or maybe I do... Oh shot! Ahhhhhh!
    rednedtugent wrote: »
    Yes, the AC-3 ended up on the amp for me...

    What amps fella's? And how flexible are they.... and if you have a comparison to Pangea that would rock, mainly on flexibility... I'm coming from AC-9's which are like wrassling a python to get into place.

    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
    · Share on Facebook
  • slbenzslbenz Posts: 97
    I used to have both the AC3 and AC5 but sold them for Signal Cables. In my system, the Signal Cables sounded a bit more open vs. the PS Audio power cords. At the time, I was using a Parasound HCA-1205A 5-channel amp powering a Martin Logan speaker system.
    · Share on Facebook
  • mikeyb128mikeyb128 Posts: 2,886
    EndersShadow wrote: »
    mrbiron wrote: »
    I have 3 AC3s and a fourth being delivered tomorrow. I like them a lot and don't be worried about flexibility, you could make a pretzel if you wanted.

    They all plug into my PS audio Upc 200 power conditioner.

    Definitely want to try a PS audio outlet for $50 and when costs prohibits, I want to try a regenerator. (Long-term goal)

    PS Audio has my heart....

    Yeah I've got 3 of em I bought off someone here for 75 bucks on the way. 2 for the HT, one for the office.
    mikeyb128 wrote: »
    I have 3 ac3's in my theater, great cable! I heard a significant difference in sound when adding one to my amp. I use signal magic cables for my mono blocks down stairs, they are way to stiff, but haven't got the itch to upgrade them... Or maybe I do... Oh shot! Ahhhhhh!
    rednedtugent wrote: »
    Yes, the AC-3 ended up on the amp for me...

    What amps fella's? And how flexible are they.... and if you have a comparison to Pangea that would rock, mainly on flexibility... I'm coming from AC-9's which are like wrassling a python to get into place.

    Super flexible, almost strangely flexible actually. Mine in on a sunfire tga 7401, one to my power conditioner, the other is on my Marantz 7702. The rest in the system are audioquest nrg2, which I really like as well, not as flexible, but stay in place once bent due to their solid core wires.
    2 channel:
    Bryston 4B3, Bryston BDA3, Cary SLP05, Shanling CDT1000SE with parts conneXion level 2 mods, Nottingham analogue ace space 294, soundsmith Carmen MKii, Zu DL103 MKii, Ortofon MC 20 MKii, Dynavector XX2 MKii, Rogue Audio Ares, Core power technologies balanced power conditioner, Akiko Corelli power conditioner with Akiko Audio HQ power cable, Nordost heimdall 2, Frey 2, interconnects, speaker and power cables, Focal Electra 1028 BE 2, Auralic Aries Femto, Black diamond racing cones, ingress audio level 1 roller blocks, JL Audio E110 with Auralic subdude, Primacoustics room treatments.
    Theater:
    Focal Aria 926,905,CC900, SVS PB ultra x2. Pioneer Elite SC85, Oppo BDP93, Panamax M5400PM, Minix neox6, Nordost Blue heaven LS power cables.

    · Share on Facebook
  • [Deleted User][Deleted User] Posts: 91
    edited January 2016
    Benchmark AHB2 into the Detect on Isozone 1 by itself.
    My thinking is the AHB2 has a switching power supply
    that produces regulated output, so regulated input...

    I have the pre plugged into the HC Isozone by itself.

    This is like day 4 so I'm still playing around with it all.
    The best I can say is it has a bit more pleasing sound.
    Oh, and more flexable than the AC-9 (which doesn't
    do much for me) and on a par with the Magic cable.
    (after it thaws out on delivery)
    Studio 2 equipment;
    Yamaha a-s2100 Amp, CD-2100 CD player, T-S500 tuner
    Loudspeakers: Harbeth p3esr, Polk RT7
    Cables: Aural Harmony Sonnet Interconnect II, WireWorld Equinox 7 speaker,
    Black Cat silverstar 75 ohm digital, Signal Digital Power Cord, PS Audio Perfect Wave AC-3,
    Pangea SE14, Voltz supplied interconnects
    Optional: Arcam DV88 DVD/CD (HDCD) player, Polk SDS-400 speakers
    · Share on Facebook
  • mrbironmrbiron Posts: 5,098
    EndersShadow wrote: »
    mrbiron wrote: »
    I have 3 AC3s and a fourth being delivered tomorrow. I like them a lot and don't be worried about flexibility, you could make a pretzel if you wanted.

    Prove it :wink:

    Throws down the gauntlet..........challenge accepted!
    I will have to use the 2M as the 1M im getting today will be far to short to make a reasonable pretzel.
    Zu Audio Omen MK-1B's, Peachtree Decco65, Bryston BDA-2, Cheap TT, PS Audio UPC200, PS Audio AC3's, Zu Mission SC's, HTPC, One, Bottlehead Crack w/Speedball, Senn's MD HD600
    · Share on Facebook
  • motorhead43026motorhead43026 Posts: 3,245
    I just ordered some more AC-3's. I could have sworn they were no longer on sale.
    2 channel: Anthem 225 Integrated amp; Parasound Ztuner; TechnicsTT SL1350; Vincent PHO-8 phono pre; Marantz CD6005 spinner; Polk SDA2BTL's; Cables ZU Mission IC's, SC and power cords, all into a PS Audio Dectet Power center.

    All TV's sound enhanced by Polk Magnfi Mini's.

    Other; S60'S, M10 series II, M7C's, Hafler XL600 amp, RB-980BX, Parasound HCA-1500 amp , P5 preamp, all in storage. All speakers have had crossover rebuilds, resulting in a small fortune invested in Sonicaps, and tweeter upgrades.

    Political memes posted as fact and accepted as fact, are sign language of the ignorant, for the ignorant

    tonyb said " but even socialists can do a good thing here and there

    Social media makes dumb people dumber and smart people dumb then dumber.
    · Share on Facebook
  • mrbironmrbiron Posts: 5,098
    rednedtugent wrote: »
    (after it thaws out on delivery)

    Good point! I will have to let my cable warm up before making such bends. It's a cool "real feel" of -11 at my front door. It may take some time...
    Zu Audio Omen MK-1B's, Peachtree Decco65, Bryston BDA-2, Cheap TT, PS Audio UPC200, PS Audio AC3's, Zu Mission SC's, HTPC, One, Bottlehead Crack w/Speedball, Senn's MD HD600
    · Share on Facebook
  • [Deleted User][Deleted User] Posts: 91
    "It's a cool "real feel" of -11" :o
    Studio 2 equipment;
    Yamaha a-s2100 Amp, CD-2100 CD player, T-S500 tuner
    Loudspeakers: Harbeth p3esr, Polk RT7
    Cables: Aural Harmony Sonnet Interconnect II, WireWorld Equinox 7 speaker,
    Black Cat silverstar 75 ohm digital, Signal Digital Power Cord, PS Audio Perfect Wave AC-3,
    Pangea SE14, Voltz supplied interconnects
    Optional: Arcam DV88 DVD/CD (HDCD) player, Polk SDS-400 speakers
    · Share on Facebook
  • pitdogg2pitdogg2 Posts: 13,992
    rednedtugent wrote: »
    "It's a cool "real feel" of -11" :o
    It's a dry cool :p
    · Share on Facebook
  • hochpt21hochpt21 Posts: 5,177
    Bit the bullet and ordered an AC5.
    __________________________________________________
    2 Channel
    Turntable - VPI Scout 1.1/Ortofon 2M Blue
    Integrated Amplifier - Rogue Audio Cronus Magnum II
    Speakers - GoldenEar Triton 2
    __________________________________________________
    7.1 Home Theater
    Denon AVR-X3300W; Rotel RMB-1066; Polk CS350ls, LS90's, FXi3's, RC60i; SVS PC Ultra; BenQ W1070; Elite Screens 120"
    __________________________________________________
    Man Cave
    Turntable - 1) Pro-Ject 2.9 Wood/Grado Gold; 2) Sony PS LX410/Grado Green
    Phono Stage - PS Audio GCPH, Parks Audio Budgie; CD - Marantz DV4001
    Preamp - Dared SL2000a, Luminous Audio Axiom II; Amplifier - Parasound HCA-1500A
    Speakers - SDA 2A (x-overs etc...); Epos Epic 2; Polk Audio Monitor 70 (my first)
    __________________________________________________
    · Share on Facebook
  • mrbironmrbiron Posts: 5,098
    Gadzooks!
    I was thinking of doing the same today....along with an outlet!
    so my chain would be PS Audio Classic ->AC5 -> PS Audio UPC 200 ->AC3s -> components.

    Atta boy!!!!
    Zu Audio Omen MK-1B's, Peachtree Decco65, Bryston BDA-2, Cheap TT, PS Audio UPC200, PS Audio AC3's, Zu Mission SC's, HTPC, One, Bottlehead Crack w/Speedball, Senn's MD HD600
    · Share on Facebook
  • hochpt21hochpt21 Posts: 5,177
    I already have the classic outlet. Now the AC5 and it will go directly into the MF integrated.

    I have a very entry level Furman M8x2 power conditioner that I plug the rest of my gear into.
    __________________________________________________
    2 Channel
    Turntable - VPI Scout 1.1/Ortofon 2M Blue
    Integrated Amplifier - Rogue Audio Cronus Magnum II
    Speakers - GoldenEar Triton 2
    __________________________________________________
    7.1 Home Theater
    Denon AVR-X3300W; Rotel RMB-1066; Polk CS350ls, LS90's, FXi3's, RC60i; SVS PC Ultra; BenQ W1070; Elite Screens 120"
    __________________________________________________
    Man Cave
    Turntable - 1) Pro-Ject 2.9 Wood/Grado Gold; 2) Sony PS LX410/Grado Green
    Phono Stage - PS Audio GCPH, Parks Audio Budgie; CD - Marantz DV4001
    Preamp - Dared SL2000a, Luminous Audio Axiom II; Amplifier - Parasound HCA-1500A
    Speakers - SDA 2A (x-overs etc...); Epos Epic 2; Polk Audio Monitor 70 (my first)
    __________________________________________________
    · Share on Facebook
  • EndersShadowEndersShadow Posts: 16,755
    You guys suck. I ordered a AC-3 2m and 1m cable..... Prob gonna order a 2m AC-5 too in the next week or so.....

    Want to strike while the Irons Hot and these are on sale.....

    AC-3 for my APC H15, Denon X4100a and the AC-5 for my B&K with maybe another ordered later on for my Dayton sub amp.......
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
    · Share on Facebook
  • hochpt21hochpt21 Posts: 5,177
    I went with the AC5 simply because it technically will power my pre, power and phono amp. It's the only removable cord in my system.

    I'm tempted to get an AC3, because I am sorta on the lookout for a dedicated phono pre at some point, and would be nice to have. But by that point, I'll probably just buy one of the AC3's off Dan for a discounted price anyways.

    :*
    @EndersShadow
    __________________________________________________
    2 Channel
    Turntable - VPI Scout 1.1/Ortofon 2M Blue
    Integrated Amplifier - Rogue Audio Cronus Magnum II
    Speakers - GoldenEar Triton 2
    __________________________________________________
    7.1 Home Theater
    Denon AVR-X3300W; Rotel RMB-1066; Polk CS350ls, LS90's, FXi3's, RC60i; SVS PC Ultra; BenQ W1070; Elite Screens 120"
    __________________________________________________
    Man Cave
    Turntable - 1) Pro-Ject 2.9 Wood/Grado Gold; 2) Sony PS LX410/Grado Green
    Phono Stage - PS Audio GCPH, Parks Audio Budgie; CD - Marantz DV4001
    Preamp - Dared SL2000a, Luminous Audio Axiom II; Amplifier - Parasound HCA-1500A
    Speakers - SDA 2A (x-overs etc...); Epos Epic 2; Polk Audio Monitor 70 (my first)
    __________________________________________________
    · Share on Facebook
  • mrbironmrbiron Posts: 5,098
    That's good thinking!......Enders, buy an AC5 and i'll grab it at used pricing from you next month.
    Zu Audio Omen MK-1B's, Peachtree Decco65, Bryston BDA-2, Cheap TT, PS Audio UPC200, PS Audio AC3's, Zu Mission SC's, HTPC, One, Bottlehead Crack w/Speedball, Senn's MD HD600
    · Share on Facebook
  • EndersShadowEndersShadow Posts: 16,755
    hochpt21 wrote: »
    I went with the AC5 simply because it technically will power my pre, power and phono amp. It's the only removable cord in my system.

    I'm tempted to get an AC3, because I am sorta on the lookout for a dedicated phono pre at some point, and would be nice to have. But by that point, I'll probably just buy one of the AC3's off Dan for a discounted price anyways.

    :*
    @EndersShadow

    BURN! Well I've got 30 days to return em if I dont like em so BOO ON YOU!

    I know the AC-5 is what I'd want for my big amps (B&K & Dayton SA1000), but the AC-3 should handle all the other small stuff (HTPC, Xbox One, Denon), and the rest of my gear is on 12v wallwarts (Netgear Switch, Uverse DVR, Asus network bridge, 120mm fans for cooling the Denon, Darbee Darblett). I will leave my buttkicker 300 watt amp on the *gasp* stock cord......
    mrbiron wrote: »
    That's good thinking!......Enders, buy an AC5 and i'll grab it at used pricing from you next month.

    HA! You wont stay sober long enough to remember :wink:
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
    · Share on Facebook
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links

© Polk Audio 2014