Carver 1.5T Power Button

cdn5003
cdn5003 Posts: 144
edited August 2011 in Electronics
Hey guys I just acquired a Carver 1.5T to power my Lsi9's and it is the first amplifier that I have owned without a power button. What is the safest way to hook it up?

I currently have it plugged directly into the wall. I attached the speaker cables and rca's from the preamplifier before plugging in the amp.

It is working great but I want to make sure that I don't do anything really stupid. When I power down should I turn everything off first then unplug the amp?

Also, turn everything else on first before plugging in the amp when I start up?
HT Setup: Onkyo 706; Rotel RB-1075; Rti A3; Csi A6; Fxi3's

2 CH: Squeezebox Touch; Dared SL-2000a; GoldenEar Triton 5 or Lsi9's; Parasound 2125; SVS SB12-NSD; Music Hall DAC 25.2
Post edited by cdn5003 on
· Share on FacebookShare on Twitter

Comments

  • decal
    decal Posts: 3,205
    edited August 2011
    It powers up when you plug it in? That's strange, at least to me.
    If you can't hear a difference, don't waste your money.
    · Share on FacebookShare on Twitter
  • engtaz
    engtaz Posts: 7,669
    edited August 2011
    I use a current sense power plug from Sears to sense when my pre is powered on and It's powers up the amp.
    engtaz

    I love how music can brighten up a bad day.
    · Share on FacebookShare on Twitter
  • treitz3
    treitz3 Posts: 19,957
    edited August 2011
    What most folks do that have that amplifier do, is just hook it up to a power conditioner/strip that includes an on/off button. Either that or they just keep it on 24/7. Bob was great at many things but when it came to powering things, he was a little strange. Still is to this day, to a point. These were supposed to have been plugged into the back of his pre's. You do not want to do that, it degrades the sound of the overall system.

    Leaving it on 24/7 will not hurt anything but if you go this route, make sure you unplug it during lightning storms. This was the route I took when I had them in the rig.
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
    · Share on FacebookShare on Twitter
  • Glowrdr
    Glowrdr Posts: 1,103
    edited August 2011
    Wonder if Pepster could design you a power cord with a built-in switch somewhere in the line?
    65" Sony X900 (XBR-65X900E)
    Pioneer Elite SC-37
    Polk Monitor 70's (2)
    Polk Monitor 40's (4)
    Polk Monitor CS2
    Polk DSW Pro 660wi
    Oppo BDP-93
    Squeezebox Duet
    Belkin PureAV PF60
    Dish Network "The Hoppa"
    · Share on FacebookShare on Twitter