What Brand of amps tend to be Warm
jbooker82
Posts: 1,627
What brand of Amplifiers tend to be on the warm side. I am just wondering wich ones would be a good match for my RTI A7's, CSI A4, and FXI A4's, and Onkyo TX-NR808 Avr.
I would like to have at least 250 WPC X 5 Channel.
I would like to have at least 250 WPC X 5 Channel.
AVR: Onkyo Tx-NR808
Amplifier: Carver A-753x 250 watts x 3
Fronts: Polk RTI A7 (modded by Trey VR3)
Center: CSI A4 (modded by Trey VR3)
Rear: FXI A4
Sub: Polk DSW Pro 660wi
TV: LG Infinia 50PX950 3D
Speaker Cable: AudioQuest Type 8
IC: AudioQuest Black Mamba II
Amplifier: Carver A-753x 250 watts x 3
Fronts: Polk RTI A7 (modded by Trey VR3)
Center: CSI A4 (modded by Trey VR3)
Rear: FXI A4
Sub: Polk DSW Pro 660wi
TV: LG Infinia 50PX950 3D
Speaker Cable: AudioQuest Type 8
IC: AudioQuest Black Mamba II
Post edited by jbooker82 on
Comments
-
Parasound, B&K, NAD....and the usual suspects of everytime this question is asked. You don't need that much power in reality....just worry about the fronts since the Onkyo can handle the rest just fine.CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
-
I have been looking at some Parasound's. How long of a life do amp's have? Is an amp that is 10 years old getting twards the end of its life or are they good for a long time? I have just seen some Sunfire's that are supose to be around 10 years old and the seller is asking around $1500.AVR: Onkyo Tx-NR808
Amplifier: Carver A-753x 250 watts x 3
Fronts: Polk RTI A7 (modded by Trey VR3)
Center: CSI A4 (modded by Trey VR3)
Rear: FXI A4
Sub: Polk DSW Pro 660wi
TV: LG Infinia 50PX950 3D
Speaker Cable: AudioQuest Type 8
IC: AudioQuest Black Mamba II -
The amplifier may outlive you man....and 10 years is not odd for ANYTHING in audio. Don't go by year, go by quality and reputation. I'm not a Sunfire fan, maybe someone else can expound upon how awesome they are.CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
-
+1 for Parasound.Living room
Speakers: McIntosh XR100 Fronts, LSIM707 Fronts, LSIM 706 Center, LSIM 703 Surrounds, LSi/FX Surround backs.
Player: Oppo 95.
Amps: Bryston 4B SST, B&K Ref 200.7 S2.
Pres: B&K Ref 50 S2, Paraound P5.
Subs: Dual Rythmik F15HP subs.
Man Cave
Speakers: Martin Logan Vistas.
Player: OPPO 105.
Preamp: B&K Ref 50 S2.
Amp: B&K Ref 125.2 S2
Sub: Rythmik F12.
Sub management: SMS-1.
Headphones: HD800, HD380, RS220, SRH-1840. Headphone amp: Woo WA2.
Room treatment: GIK Room Kit #1. -
Parasound, B&K, NAD....and the usual suspects of everytime this question is asked. You don't need that much power in reality....just worry about the fronts since the Onkyo can handle the rest just fine.
Add Rotel, Aragon, and Acurus to that list, and I concur.Check your lips at the door woman. Shake your hips like battleships. Yeah, all the white girls trip when I sing at Sunday service. -
Alright thanks guys. I will keep my eyes out for a Parasound 5250. I think that would make for a nice one.AVR: Onkyo Tx-NR808
Amplifier: Carver A-753x 250 watts x 3
Fronts: Polk RTI A7 (modded by Trey VR3)
Center: CSI A4 (modded by Trey VR3)
Rear: FXI A4
Sub: Polk DSW Pro 660wi
TV: LG Infinia 50PX950 3D
Speaker Cable: AudioQuest Type 8
IC: AudioQuest Black Mamba II -
My Rotel 50wpc amp lasted 18 years, and got daily use just as my Sunfire does now.Marantz AV-7705 PrePro, Classé 5 channel 200wpc Amp, Oppo 103 BluRay, Rotel RCD-1072 CDP, Sony XBR-49X800E TV, Polk S60 Main Speakers, Polk ES30 Center Channel, Polk S15 Surround Speakers SVS SB12-NSD x2
-
I would question NAD and ROTEL for warmth. Good clean power yes but warm I don't hear.
-
A vote for a B&K here.AVR: Elite VSX-21TXH
Amplifier: B&K 7250 Series ii
Misc: Velodyne SMS-1
Mains: RTi-10
Center: CSi-5
Rear: Boston DSi460
Sub: SVS PC-Ultra
TV: Panasonic TC-P58V10
DVD: Panasonic DMP-BD60K -
I understand most of the recommendations above...but Rotel? I've usually heard Rotel described as a 'neutral' sound?
cnhCurrently orbiting Bowie's Blackstar.!
Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
[sig. changed on a monthly basis as I rotate in and out of my stash] -
I think I totally misunderstood your post. I guess your talking about warmth of sound and not how hot an avr is running. Truth be told though, my Yamaha when pushed gets hot and not in a good way.2chl- Adcom GFA- 555-Onkyo P-3150v pre/amp- JVC-QL-A200 tt- Denon 1940 ci cdp- Adcom GFS-6 -Modded '87 SDA 2Bs - Dynamat Ext.- BH-5- X-Overs VR-3, RDO-194 tweeters, Larry's Rings, Speakon/Neutrik I/C- Cherry stain tops Advent Maestros,Ohm model E
H/T- Toshiba au40" flat- Yamaha RX- V665 avr- YSD-11 Dock- I-Pod- Klipsch #400HD Speaker set-
Bdrm- Nikko 6065 receiver- JBL -G-200s--Pioneer 305 headphones--Sony CE375-5 disc -
Rotel Baby!!!!!Norh ACA-2B tube pre, Sumo Andromeda SS amp. Magneplanar MMG speakers, M&K MX1250 Subwoofer, Pro-Ject RM1.3 Genie TT with Sumiko Pearl MM cart., Keces DAC, Cambridge Audio Azur 640c CD player
-
Tube amps are warm and warm sounding.Sunfire TGP, Sunfire Cinema Grand, Sunfire 300~2 (2), Sunfire True Sub (2),Carver ALS Platinum, Carver AL III, TFM-55, C-19, C-9, TX-8, SDA-490t, SDA-390t
-
McIntosh can be thrown in the ring also. How much are you looking to spend?Klipsch The Nines, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
-
The amplifier may outlive you man....and 10 years is not odd for ANYTHING in audio. Don't go by year, go by quality and reputation. I'm not a Sunfire fan, maybe someone else can expound upon how awesome they are.
I am using a 20+ year old Parasound HCA-500 driving a pair of Monitor 60's .. it just does not give up...the 50 WPC is plenty for me ..they are honest watts.*************************
** Bill Clark Windham, VT **
************************* -
Class A :{)
-
McIntosh can be thrown in the ring also. How much are you looking to spend?
I've always liked the sound of B&K. I've a 7250 in my ht and it has been working well since around 1993. Perhaps that is why I moved to McIntosh. The sound is somewhat alike or maybe because they where/are made in New York?!:biggrin:
Gordon2 Channel -
Martin Logan Spire, 2 JL Audio F112 subs
McIntosh C1000 Controller with Tube pre amp, 2 MC501 amplifiers, MD1K Transport & DAC, MR-88 Tuner
WireWorld Eclipse 6.0 speaker wire and jumpers, Eclipse 5^2 Squared Balanced IC's. Silver Eclipse PCs (5)
Symposium Rollerblocks 2+ (16)Black Diamond Racing Mk 3 pits (8) -
McIntosh can be thrown in the ring also. How much are you looking to spend?
Around 1500 for a good used amp.AVR: Onkyo Tx-NR808
Amplifier: Carver A-753x 250 watts x 3
Fronts: Polk RTI A7 (modded by Trey VR3)
Center: CSI A4 (modded by Trey VR3)
Rear: FXI A4
Sub: Polk DSW Pro 660wi
TV: LG Infinia 50PX950 3D
Speaker Cable: AudioQuest Type 8
IC: AudioQuest Black Mamba II -
I'm using all Parasound amps for my RTi A speakers -
HCA1000A for the CSi A6 (bi-amped), A21 for the RTi A7s, and the NC2250 for the RTi A1s and I'd agree that it warms up the slight brightness of these speakers. Plus the A7s pound when you turn 'em up
Dali Optikon 1Mk2
NAD D3020 V2
Schiit Bifrost 2/64
..the rest are headphone setups. -
Plus the A7s pound when you turn 'em up

That is kind of why I am starting to look for an amp. I would like to hear their full potential.AVR: Onkyo Tx-NR808
Amplifier: Carver A-753x 250 watts x 3
Fronts: Polk RTI A7 (modded by Trey VR3)
Center: CSI A4 (modded by Trey VR3)
Rear: FXI A4
Sub: Polk DSW Pro 660wi
TV: LG Infinia 50PX950 3D
Speaker Cable: AudioQuest Type 8
IC: AudioQuest Black Mamba II -
My research on Sunfire amps (and the one Sunfire amp I own) indicate a 10 Year shelf life for capacitors - particularly the filter caps. Then expect to pay between $150-$200 for repairs.
Perhaps not every Sunfire, but check it out online - you'd be surprised.Do you hear that buzzing noise?
-
Do they just not last that long or do they use cheap parts? I was looking at one and the guy claims he sent it in about 2 years ago for a check up. He claims that they replaced the power supply "as a percausionary" step.
I don't know why you would send something in if it isn't broke.AVR: Onkyo Tx-NR808
Amplifier: Carver A-753x 250 watts x 3
Fronts: Polk RTI A7 (modded by Trey VR3)
Center: CSI A4 (modded by Trey VR3)
Rear: FXI A4
Sub: Polk DSW Pro 660wi
TV: LG Infinia 50PX950 3D
Speaker Cable: AudioQuest Type 8
IC: AudioQuest Black Mamba II -
No one's mentioned Carver yet. They were built to sound like tubes and are quite warm sounding. The TFM's I've heard all sound warm. Also in the vintage category is Hafler amps sound warm as well.
And to answer the above question, electrolytic caps tend to dry up over time and resistors can drift out of value so a pre-emptive check up is certainly not out of the ordinary. It's just like checking the oil or the tires on a car. You don't wait for it to run dry or flat to maintain them.SDA-1C (full mods)
Carver TFM-55
NAD 1130 Pre-amp
Rega Planar 3 TT/Shelter 501 MkII
The Clamp
Revox A77 Mk IV Dolby reel to reel
Thorens TD160/Mission 774 arm/Stanton 881S Shibata
Nakamichi CR7 Cassette Deck
Rotel RCD-855 with modified tube output stage
Cambridge Audio DACmagic Plus
ADC Soundshaper 3 EQ
Ben's IC's
Nitty Gritty 1.5FI RCM -
What brand of Amplifiers tend to be on the warm side. I am just wondering wich ones would be a good match for my RTI A7's, CSI A4, and FXI A4's, and Onkyo TX-NR808 Avr.
I would like to have at least 250 WPC X 5 Channel.
http://www.wyred4sound.com/webapps/p/74030/117839/339143"He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche -
Monster Jam wrote: »My research on Sunfire amps (and the one Sunfire amp I own) indicate a 10 Year shelf life for capacitors - particularly the filter caps. Then expect to pay between $150-$200 for repairs.
Perhaps not every Sunfire, but check it out online - you'd be surprised.
In your research did you uncover why Sunfire amps have a 60% less shelf life than most amps? A properly spec'd and unabused electrolytic should last 20-25 years on average. 10 years is a very short life span for an electrolytic cap unless it's in extreme conditions. If that's the case, there must be a design flaw, or extremely inexpensive parts are used or some other thing at work for Sunfire amps.
H9"Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul! -
Good point, Brock. That thought had crossed my mind as well when I read that post.
10 years is a 'very' short period of time for a good amp!
cnhCurrently orbiting Bowie's Blackstar.!
Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
[sig. changed on a monthly basis as I rotate in and out of my stash] -
Good point, Brock. That thought had crossed my mind as well when I read that post.
10 years is a 'very' short period of time for a good amp!
cnh
Perhaps there is a manufacturer recommendation to have them serviced at the 10 year mark. Thus, at the time, ensuring some factory service work (read income) that might only be marginally necessary or not necessary at all.
There are certainly extremes to the 20-25 year rule of thumb, some e caps will wear out quicker and some will last longer. Myself, I wouldn't even be concerned until about the 15th year. Even then it would be in the back of my mind. Obviously if one is having issues that are cap related I wouldn't ignore it because it's not at the 20-25 year mark.
H9"Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul! -
Thanks for all the info. I really apprecate it. I just though 10 years sounded kind of short.
The Sunfire amp I was looking at the guy wanted 800 bucks for a grand cinima 200 x5. Said it was sent in about 2 years ago. If i buy the amp and then it needs work done I am just about at the price of new one.AVR: Onkyo Tx-NR808
Amplifier: Carver A-753x 250 watts x 3
Fronts: Polk RTI A7 (modded by Trey VR3)
Center: CSI A4 (modded by Trey VR3)
Rear: FXI A4
Sub: Polk DSW Pro 660wi
TV: LG Infinia 50PX950 3D
Speaker Cable: AudioQuest Type 8
IC: AudioQuest Black Mamba II -
The Sunfire amp I was looking at the guy wanted 800 bucks for a grand cinima 200 x5. Said it was sent in about 2 years ago. If i buy the amp and then it needs work done I am just about at the price of new one.
Thats about what I paid for mine after shipping. Upon discovering the noise on all channels, I contacted the seller and he immediately refunded the amount of the estimated repair charge. I got it back and now and no problems; I have a pretty good local electronics repair shop to lean on. But early on in this crisis there was angst. If I could have gone back in time, I would have bought an Emotiva product instead of the used Sunfire. Heck, I'd still like to buy an Emotiva XPA-5 so I can side by side it against the Sunfire.
In response to Heiney's comment - I cant answer the question. I'd like to believe that Sunfire - a VERY highly respected company, uses superior internal components, but I don't know. I just know my singular experience and my research - which is not comprehensive by any stretch.
And in full disclosure, the Sunfire amp I have is 12 years old, not 10.Do you hear that buzzing noise?
-
Thanks for all the info. I really apprecate it. I just though 10 years sounded kind of short.
The Sunfire amp I was looking at the guy wanted 800 bucks for a grand cinima 200 x5. Said it was sent in about 2 years ago. If i buy the amp and then it needs work done I am just about at the price of new one.
A new 7201 is $2000-$2600...minor repairs could be as little as 45 and major 200 you'll still be ahead...my .022-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC
erat interfectorem cesar et **** dictatorem dicere a












