Should I grab this Pioneer Elite?

bigaudiofanatic
bigaudiofanatic Posts: 4,415
edited October 2009 in Electronics
I know there is a chance of someone grabbing this from under me by posting it here but, should I get this receiver on the site it says retails for 1400. Should I grab this? Buy it now is 215

http://cgi.ebay.com/Pioneer-Elite-Receiver-VSX-45TX_W0QQitemZ220502153223QQcmdZViewItemQQptZReceivers_Tuners?hash=item3356f3d807
HT setup
Panasonic 50" TH-50PZ80U
Denon DBP-1610
Monster HTS 1650
Carver A400X :cool:
MIT Exp 3 Speaker Wire
Kef 104/2
URC MX-780 Remote
Sonos Play 1

Living Room
63 inch Samsung PN63C800YF
Polk Surroundbar 3000
Samsung BD-C7900
Post edited by bigaudiofanatic on

Comments

  • nooshinjohn
    nooshinjohn Posts: 26,001
    edited October 2009
    the condition looks rather shaky to me so I would say no... Let a couple of the others chime in before you jump on it...
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2800 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon MiND2 Shunyata Triton

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson


    How many flies need to be buzzing a dead horse before you guys stop beating it?
  • bigaudiofanatic
    bigaudiofanatic Posts: 4,415
    edited October 2009
    Thanks for the reply I have a my finger on the trigger. Just need some opinions.
    HT setup
    Panasonic 50" TH-50PZ80U
    Denon DBP-1610
    Monster HTS 1650
    Carver A400X :cool:
    MIT Exp 3 Speaker Wire
    Kef 104/2
    URC MX-780 Remote
    Sonos Play 1

    Living Room
    63 inch Samsung PN63C800YF
    Polk Surroundbar 3000
    Samsung BD-C7900
  • Zoomzilla
    Zoomzilla Posts: 76
    edited October 2009
    Hmm, price seems a bit low to me. I would be skeptical. However, dude has a 100% rating, so I would ask him some questions if you are really serious about it. Find out more about it.
  • bigaudiofanatic
    bigaudiofanatic Posts: 4,415
    edited October 2009
    Already sent a question sheet asking, How long he has used it, any problems with it, do you have any rear pics of it. I would die to have this. It would allow me to upgrade a lot in the future. I just wanted to get more opinions before I buy it. More opinions please.
    HT setup
    Panasonic 50" TH-50PZ80U
    Denon DBP-1610
    Monster HTS 1650
    Carver A400X :cool:
    MIT Exp 3 Speaker Wire
    Kef 104/2
    URC MX-780 Remote
    Sonos Play 1

    Living Room
    63 inch Samsung PN63C800YF
    Polk Surroundbar 3000
    Samsung BD-C7900
  • nooshinjohn
    nooshinjohn Posts: 26,001
    edited October 2009
    If it is priced right, and something you "must have" don't wait to long...
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2800 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon MiND2 Shunyata Triton

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson


    How many flies need to be buzzing a dead horse before you guys stop beating it?
  • bigaudiofanatic
    bigaudiofanatic Posts: 4,415
    edited October 2009
    Well I just have to go grovel at my friends feet for some extra cash. But no I do not need it but at that price very hard to walk away from.
    HT setup
    Panasonic 50" TH-50PZ80U
    Denon DBP-1610
    Monster HTS 1650
    Carver A400X :cool:
    MIT Exp 3 Speaker Wire
    Kef 104/2
    URC MX-780 Remote
    Sonos Play 1

    Living Room
    63 inch Samsung PN63C800YF
    Polk Surroundbar 3000
    Samsung BD-C7900
  • doggie750
    doggie750 Posts: 1,160
    edited October 2009
    cool for another HT room
    Godspeed,
    D0661E

    AVR:Pioneer Elite SC-07
    Surrounds: RTis
    2channel:Rti100 (carver driven
    Sub:SVS PB12-Plus/2
    Dedicated AMPs:Adcom GFA535, 2xCarver 1.5t, Carver m1.0t
    Wsrn:Hitachi ultra vision LCD60, 32XBR400
    PowerConditioner: MonsterC HTS5100
    PS3, Toshiba HD A2, etc: SonySACD/ Panasonic gears DIVX.


    MR3LIGION: Polkaudio; GSXR; E46; Reeftank;
    Odyclub; Xsimulator; Sony; Zune; Canon
  • bigaudiofanatic
    bigaudiofanatic Posts: 4,415
    edited October 2009
    LOL I do not have another room to add a HT. If I get this one I will sell the one I have now and get some amps in the future.

    Does anyone have a rear shot of this receiver? I googled it and the one that came up was a onkyo.
    HT setup
    Panasonic 50" TH-50PZ80U
    Denon DBP-1610
    Monster HTS 1650
    Carver A400X :cool:
    MIT Exp 3 Speaker Wire
    Kef 104/2
    URC MX-780 Remote
    Sonos Play 1

    Living Room
    63 inch Samsung PN63C800YF
    Polk Surroundbar 3000
    Samsung BD-C7900
  • cnh
    cnh Posts: 13,284
    edited October 2009
    Isn't that just a bidding price? So wouldn't that mean it will RISE before you get it.

    John, not sure why you think the unit looks in bad shape...it seems OK for being a few years old...just bad pics...too much reflection. If you look closely it's in reasonable shape..would be nice to see the back end...if a unit is efed up the first thing to be torn off is the flip down panel...but this one is still there!

    I also doubt this guy has got his figures right...if that receiver weighs in at 50lbs..packed, it's at least over 40lbs unpacked and should have more than 100 watts/channel.

    I would look up the spec on Pioneer's sites in their archives section.

    Being an Elite it will have everything you need except HDMI and HD-sound processing because of its age. It should have pre-outs and 5.1 or 7.1 ins so you could, perhaps use the mulit-analog ins for Blu-ray sound playback if you have a BDP that decodes HD and has multi-analogs out!

    Should be a nice receiver if it is functioning?


    cnh
    Currently orbiting Bowie's Blackstar.!

    Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
    [sig. changed on a monthly basis as I rotate in and out of my stash]
  • bigaudiofanatic
    bigaudiofanatic Posts: 4,415
    edited October 2009
    Ya but the but it now price is 215. I did go to the pioneer website, 100 watts per channel is correct.

    http://www.pioneerelectronics.com/PUSA/Products/HomeEntertainment/AV-Receivers/EliteReceivers/VSX-45TX?tab=B
    HT setup
    Panasonic 50" TH-50PZ80U
    Denon DBP-1610
    Monster HTS 1650
    Carver A400X :cool:
    MIT Exp 3 Speaker Wire
    Kef 104/2
    URC MX-780 Remote
    Sonos Play 1

    Living Room
    63 inch Samsung PN63C800YF
    Polk Surroundbar 3000
    Samsung BD-C7900
  • cnh
    cnh Posts: 13,284
    edited October 2009
    I looked at the specs...all I can say is that that must put out a GENUINE 100 watts to all channels....because its one big-a$$ AVR....

    215 is a great price...Elite equipment is pretty good and fairly reliable....the only thing 'suspect' is the 3 day money back return offer he has..

    Does that 3 days include the 5-7 days it will take to get to your house UPS ground!

    I'd make sure that you can return this if it is, in fact non-functional. Otherwise...great price!

    cnh
    Currently orbiting Bowie's Blackstar.!

    Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
    [sig. changed on a monthly basis as I rotate in and out of my stash]
  • bigaudiofanatic
    bigaudiofanatic Posts: 4,415
    edited October 2009
    Well looks like I will wait until I get a reply form him. Depending on that I will make my decision.
    HT setup
    Panasonic 50" TH-50PZ80U
    Denon DBP-1610
    Monster HTS 1650
    Carver A400X :cool:
    MIT Exp 3 Speaker Wire
    Kef 104/2
    URC MX-780 Remote
    Sonos Play 1

    Living Room
    63 inch Samsung PN63C800YF
    Polk Surroundbar 3000
    Samsung BD-C7900
  • dpowell
    dpowell Posts: 3,081
    edited October 2009
    If you're going to go 7.1, my recommendation is that you should shoot for a receiver that supports the new master audio formats.....That being said, you could spring for a Blu Ray player with analog outs. I love my Pioneer Elite!
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, McIntosh C2300, Marantz AV7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Sim Audio Moon 380D DAC, EPSON Pro Cinema 6050
  • bsoko2
    bsoko2 Posts: 1,449
    edited October 2009
    To me it is not worth the $$$. Nothing new going for it and for a few $$$ more you can get what you want these days. I have a Pio '94 and paid big $$$ for it, now Pioneer has something newer, better, more bells and whistles, and it sells for 499. This reciever borders on "vintage".

    Bill
  • mmadden28
    mmadden28 Posts: 4,283
    edited October 2009
    BAF, I know what you mean when you say its hard to pass on a good deal.

    Audiogon Bluebook shows Used Avg for this is about $600, but that's based on limited sales and the last sale could have been when it might have been worth that much-who knows. It also indicates that it was released in 2002 - That was 8 years ago already :eek:.

    A recent sale of a VSX-43TX sold for $325 on Audiogon (note its a diff model)

    Oh yeah keep in mind it's also $30 shipping.

    Personally I'd pass, but that's just because I'm all about the HiDef audio formats and HDMI lately--however if I needed a decent AVR for another room or family member that doesn't do HD it looks like a pretty decent price. Of course as long as it has analog inputs the decoding for HD formats could be done by the player so you would only have to be concerned about HDMI.
    ____________________
    This post is a natural product. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects.

    HT:Onkyo 805, Emotiva XPA-5, Mitsu 52" 1080p DLP / polkaudio RTi12, CSIa6, FXi3, uPro4K
    2-chnl : Pio DV-46AV (SACD), Dodd ELP, Emotiva XPA-1s, XPA-2, Odyssey Khartago, LSi9, SDA-SRS 2 :cool:, SB Duet, MSB & Monarchy DACs, Yamaha PX3 TT, SAE Tuner...
    Pool: Atrium 60's/45's
  • concealer404
    concealer404 Posts: 7,440
    edited October 2009
    I'd buy it. That's a bigass mean reciever, and for that price, if you don't like it, you'd have no problems getting your money back, and probably a little more.
    I don't read the newsssspaperssss because dey aaaallllllllll...... have ugly print.

    Living Room: B&K Reference 5 S2 / Parasound HCA-1000A / Emotiva XDA-2 / Pioneer BDP-51FD / Paradigm 11se MKiii

    Desk: Schiit Magni 2 Uber / Schiit Modi 2 Uber / ISK HD9999

    Office: Schiit Magni 2 Uber / Schiit Modi 2 Uber / Dynaco SCA-80Q / Paradigm Legend V.3

    HT: Denon AVR-X3400H / Sony UBP-X700 / RT16 / CS350LS / RT7 / SVS PB1000
  • bigaudiofanatic
    bigaudiofanatic Posts: 4,415
    edited October 2009
    Ya and the HDMI thing is not a biggie for me.
    HT setup
    Panasonic 50" TH-50PZ80U
    Denon DBP-1610
    Monster HTS 1650
    Carver A400X :cool:
    MIT Exp 3 Speaker Wire
    Kef 104/2
    URC MX-780 Remote
    Sonos Play 1

    Living Room
    63 inch Samsung PN63C800YF
    Polk Surroundbar 3000
    Samsung BD-C7900