What's the **** on this pre???
ND13
Posts: 7,601
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9728337893&indexURL=3&photoDisplayType=2#ebayphotohosting
Anyone have any experience with one of these??
Anyone have any experience with one of these??
"SOME PEOPLE CALL ME MAURICE,
CAUSE I SPEAK OF THE POMPITIOUS OF LOVE"
CAUSE I SPEAK OF THE POMPITIOUS OF LOVE"
Post edited by ND13 on
Comments
-
Hey Noel, a friend of mine over at the AudioCircles is running the same Poweramplifier/Loudspeaker combination as myself and is using the Dynaco Pass 4 tube preamplifier in his 2 channel system and he is very happy with his Pass 4. thanks....WCW IIIND13 wrote:http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9728337893&indexURL=3&photoDisplayType=2#ebayphotohosting
Anyone have any experience with one of these??Rogue Audio stereo 100 tube amplifier - Lector Zoe preamplifier with 6H30 pi's
.Audience AU24SE speaker and ic cables- Chord Qutest DAC - Black Cat Silverstar II 75ohm digital cable-Tyler Acoustics Linbrook Signature system with large bass cabinets to accommodate 10" Seas magnesium woofers.
-
It's some sort of remake, the PAS 4 was a sand preamp originally, and not worth even turning on, the only old tube PAS were the original, the II and the III.
Looks a lot 'busier' than the old models.Check your lips at the door woman. Shake your hips like battleships. Yeah, all the white girls trip when I sing at Sunday service. -
Yeah, that thing doesn't look like any vintage Dyna equipment I've seen (the Dynaco font is a giveaway) Maybe it's made by Panor? They're the ones that made the ST-70 series II. I'm sure it sounds good.
-
I'm wondering if any of y'all have actually read the add. The seller quotes a 'fellow ebay member' and what he had to say regarding this preamp.auction wrote:The Dynaco PAS-4 was put out several years ago by the "new" Dynaco
(a division of Panor Corp.). The electrical design was by John Nunes and
the mechanical design was by Arn Roatcap. Both were involved with MFA
(Moore-Franklin Associates) and the PAS-4 is much more similar to a MFA
unit than the classic Dynaco preamps. This preamp was not promoted very
much, I think because it was too "high-end" and expensive for the Dynaco
product line. It is a good-sounding preamp with good parts quality. I
believe it was built under contract in the United States, unlike a lot
of the other recent Dynaco products which were built in Taiwan or Japan.
In UseGeorge Grand wrote: »
PS3, Yamaha CDR-HD1300, Plex, Amazon Fire TV Gen 2
Pioneer Elite VSX-52, Parasound HCA-1000A
Klipsch RF-82ii, RC-62ii, RS-42ii, RW-10d
Epson 8700UB
In Storage
[Home Audio]
Rotel RCD-02, Yamaha KX-W900U, Sony ST-S500ES, Denon DP-7F
Pro-Ject Phono Box MKII, Parasound P/HP-850, ASL Wave 20 monoblocks
Klipsch RF-35, RB-51ii
[Car Audio]
Pioneer Premier DEH-P860MP, Memphis 16-MCA3004, Boston Acoustic RC520 -
Yeah audiobliss, i have already read it .these preamps seem to have come out in the late 90s and i looked them up @ audioreview and several of the owners had swapped out the 6922s for the Russian 61NP twin triodes. i know that this tube is compatable with some preamplifiers that use the 6922, but not many. thanks....WCW IIIaudiobliss wrote:I'm wondering if any of y'all have actually read the add. The seller quotes a 'fellow ebay member' and what he had to say regarding this preamp.Rogue Audio stereo 100 tube amplifier - Lector Zoe preamplifier with 6H30 pi's
.Audience AU24SE speaker and ic cables- Chord Qutest DAC - Black Cat Silverstar II 75ohm digital cable-Tyler Acoustics Linbrook Signature system with large bass cabinets to accommodate 10" Seas magnesium woofers. -
Yeah, read the ad, the original PAS 4 was solid state.Check your lips at the door woman. Shake your hips like battleships. Yeah, all the white girls trip when I sing at Sunday service.
