Fabric relpacement/ SRS's
drumiv
Posts: 171
I saw the thread on replacing the fabric on a set of 1.2 TL's. Is it safe to assume it's the same for 1.2's?
Post edited by drumiv on
Comments
-
I saw the thread on replacing the fabric on a set of 1.2 TL's. Is it safe to assume it's the same for 1.2's?
It is, This is the closest thing I've found to the original cloth http://www.parts-express.com/mellotone-premium-black-speaker-grill-cloth-yard-64-wide--260-332 Others like a thinner, more transparent material http://www.speakerworks.com/speaker_grill_cloth_fabric_s/25.htm which is o.k. also. -
I might have misunderstood your question, if you were referring to the removal of the side panels to recover, I would think the procedure would be the same. The side panels on some of the big SDA's were attached with a "snap on" type connector, some were glued on the cabinet (which is not too tough to remove).
-
Yes, I was talking about removal procedure. Thanks for your reply.
-
The Parts Express cloth is inferior to some of the alternative out there. I have found the cloth used by Magnepan to work much better than the original in all respects.The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson -
Great to know. I have never replaced it entirely, just done restretch and repaire with spray adhesive or hot glue. How do you recommend attaching? I've seen staples but it doesn't look factory.
