Best Of

that seems like a simpler

It was actually very labor intensive. I had to cut the SS all thread to length, rethread the cut ends and smooth out the burrs. The tubing walls are extremely thin, so I had to rough cut them with a Dremel cut off wheel, then hand file to length. The lay out took a while to get it just right, then figuring out where to drill the holes took a while as well. I was able to use the first A7 board as a template for the second, so that went faster. I used pin/socket connectors for the wires, but had to cut them shorter, a real PITA. Then soldering them to the pins of the Molex without melting the Delrin was yet another challenge. There's a lot more, but I'm sure you get the idea.

Thanks for the compliment.