gimpod

About

Username
gimpod
Joined
Visits
162
Last Active
Roles
Registered
Points
307
Posts
1,689
Badges
24

Comments

  • The gen 4 1987 version.
  • Iamtheslime wrote: » One at a time is good advice ! I'll find a ohmmeter and check the resister. Check them all!!! Iamtheslime wrote: » I bridged the polyswitch, but left the two other small brown resisters (750pf ?) resister in pla…
  • KLapinas wrote: » What is the difference between the blade/blade and pin/blade? Basically the blade/Blade is a gen 3 Version (1986) and is an enlarged SDA 1B and the Pin/blade is a gen 4 Version (1987) and is an enlarged SDA 1C with 4 bindi…
  • S........................................................................................................................................................................................................................................................…
  • Not at all, you can do the crossovers later. Call Polk and order 2 RDO-194s, make sure and tell them your a member. Welcome to the rabbit hole.
  • Iamtheslime wrote: » need a bit of expert advice ... cap's arrived and I'm looking to solder them soon. Just laying things out, and one issue I see is the original 40uf cap ... I ordered two 20uf caps to replace the 40uf (bottom right on board), …
  • Happy Birthday David and have a great one.!
  • I really hate to tell you but your using the wrong inductors, The DCR is to low and the wire gauge (AWG) looks to big. This is what you should have special ordered from PartsExpress 0.40 mH, 22 AWG, Part No. 1489, 1.25 mH, 20 AWG, Part No. 11…
  • nooshinjohn wrote: » That's why Jesse is the Club Polk President for life. This should be official.
  • @nooshinjohn No mater whatever the "BIG" thing is I truly wish the best for you & yours for life!.
  • gimpod wrote: » According to the SDA 1A Schematics your SDA's don't have external fuses but a pair of polyswitchs per speaker one each for the Stereo and Dimensional Hi-Pass sections of the crossover. This is the most likely culprit as they like t…
  • That's nice to hear IMHO there's nothing like listening to SDA's!. Like @F1nut said twisting the polyswitchs is only a temporary fix, but in your case seeing how your driving them with a "little integrated amp" (I'm assuming low watt & curren…
  • Let's see, You started with around 50 pieces of fecal matter to pickup and now you've got what around 200-300 pieces of fecal matter all over the place to pickup. Smooth move Ex-lax.
  • Mr. Sharpe wrote: » the connection is plenty tight. If the interconnect is reversed inside that would explain the large blade being on the bottom on one speaker and top on the other. is the fuse inside the rear terminal? To begin with th…
  • afterburnt wrote: » Wow, I am not trying to get out of paying it back I am just trying to find out if I have any recourse to keep them from taking it all at once. Forensics? oh the drama, the dram, the drama... Mikey all parties are fully aware…
  • Don't even get me started on sites like Facebook and the damage they do all in the name of the "Mighty Buck". I place them right up there with "Disco" as one of the biggest if not the biggest perversions ever perpetuated upon mankind!
  • JayMX wrote: » Yes they both have vertical tweeters. From what I can see on the photos they are both blade blade I really appreciate all the knowledge here and the fast responses! If in fact the SDA SRS 2's do have the blade/Blade I.C. …
  • Toolfan66 wrote: » The last part is being a pain... Yes tighten 1/4 turn before breaking! (From an old Harley Davidson repair manual)
  • tonyb wrote: » A computer can think and act independently. Sorry @tonyb but "A computer can not think and act independently" it can only do what it's been programed to do. The only thing it may know is "0" & "1", even when it's executin…
  • There losing money because more people are doing what I'm doing, I now host all my pics here on my site which runs me $10 a month with 2 gig max storage & unlimited bandwidth per month and for another $10 a month I could up the storage to 100gig…
  • Toolfan66 wrote: » I know I would never get what I have invested in mine, but that is not why I did it, I have had these for what 6-7 years now? They have given me a lot of joy in the time I have had them, I would think they are worth 2-3k but I d…
  • delkal wrote: » I would be happy if just one company would stock all of the parts you need for a project. Seems like you always need to order from 2 places. Just recently for my Monitor 10's I was able to get most of the parts from one place but …
  • Slapaho wrote: » Ya know, that wouldn't be a bad idea for wmg or someone to offer cap/resistor kits with everything needed and a diagram sheet all in one box. And of course still offer building it for them as you do now so you'd actually make a li…
  • woodhead 2 wrote: » What do you think of the price? Too high?I thought they were going for a lot cheaper, since stock. $2700 maybe depends if they are as @nooshinjohn says "Condition appears to be like they just came out of the box, and…
  • ^^ Yes from what I've heard and read the wacky weed was flowing free and easy back then.
  • billbillw wrote: » I have most, if not all, of the Microsoft spy stuff turned off...at least I think I do... AFAYK, After all this is Microturd & It would not supersize me if they were tracking everything you do and everywhere you go. …
  • Best thing if you have a copy go back win 7. JMO
  • @Jstas I feel so bad for you, I really hate it when I see someone get taken so badly. BUT being the magnanimous and omnipotent god like kind of guy I am I'm willing to take it of your hands for a couple thousand dollars (no more than 5), but onl…
  • Happy Belated Birthday Jesse! One question do vampires have birthday!
  • Dennis Gardner wrote: » I have had similar issues prejudging seemingly healthy holders of the tags, and have adjusted how I look at disabilities, being extremely blessed with good health all my life. With that said, the one that I struggle with…
Avatar

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Badges

5 InsightfulsSeventh Anniversary25 Agrees25 Likes5 Likes25 LOLs5 LOLs5 AgreesSixth Anniversary5 AnswersFifth AnniversaryFirst AnswerName DropperSecond AnniversaryFirst AnniversaryThird AnniversaryFourth AnniversaryCombo BreakerFirst Comment10 Comments100 Comments500 Comments1000 CommentsPhotogenic