Proper orientation of male split pin RCA plug

2

Comments

  • Clipdat
    Clipdat Posts: 12,559
    edited April 2018
    It's not a defect of the female RCA jack, it's just a design "flaw" that becomes apparent when using this style jack with split tip RCA cables. It's the same on all 4 pieces of gear I tried.
    pitdogg2 wrote: »
    No not difficult. but it is a stamped piece of metal in the cheaper RCA's so there could be one of two things going on. maybe there was a burr on that lot of RCA's in the stamping process or it's a piece that ties something together that happens to touch the plug. Either it was not designed to engage the RCA pin in any way it just happens to touch it.

    Yes, normally of course you wouldn't be intentionally rotating the RCA cable after it's been plugged. However the issue/situation here is that for a cable that has some weight/body to it, when you plug one end in, and then attempt to run it to the other piece of gear you are connecting, the weight and bulk of the cable can actually inadvertently rotate the plug in the jack.

    Also the issue I described earlier where if you happen to plug it in "just right" (aka wrong), then the internal piece of metal will get inserted between the split tip which just seems awkward and undesirable.
    mhardy6647 wrote: »
    I guess I am still kind of wondering why one would rotate an RCA plug in a jack?

    I don't think that's standard practice, other than a little judicious wiggling when removing one.
  • afterburnt
    afterburnt Posts: 7,892
    mhardy6647 wrote: »
    afterburnt wrote: »
    ...

    Couldnt leave well enough alone, you nroke em all!
    [emphasis added]

    Dang, just my luck -- Chrome's Swahili translator doesn't seem to be working today.

    Daktari!
  • pitdogg2
    pitdogg2 Posts: 24,475
    Clipdat wrote: »
    Yes, normally of course you wouldn't be intentionally rotating the RCA cable after it's been plugged. However the issue/situation here is that for a cable that has some weight/body to it, when you plug one end in, and then attempt to run it to the other piece of gear you are connecting, the weight and bulk of the cable can actually inadvertently rotate the plug in the jack.

    NEVER have I EVER had ANY cable with an RCA plug do this.
    Yes I have had to twist them to get them on and off due to the the tight grip of some RCA's

  • Clipdat
    Clipdat Posts: 12,559
    Thanks for sharing your experiences.

    I've experienced it with AQ King Cobra and these Douglas Connection locking cables I just got, even with the lock screwed down fairly tight and snug.
    pitdogg2 wrote: »
    NEVER have I EVER had ANY cable with an RCA plug do this.
    Yes I have had to twist them to get them on and off due to the the tight grip of some RCA's

  • mhardy6647
    mhardy6647 Posts: 32,926
    afterburnt wrote: »
    mhardy6647 wrote: »
    afterburnt wrote: »
    ...

    Couldnt leave well enough alone, you nroke em all!
    [emphasis added]

    Dang, just my luck -- Chrome's Swahili translator doesn't seem to be working today.

    Daktari!
    st5r6a1bhfmu.png

  • Viking64
    Viking64 Posts: 6,646
    MIT Shotguns = problem solved
  • afterburnt
    afterburnt Posts: 7,892
    @Clipdat you are over thinking this. Is there a "groove" ?
  • Clipdat
    Clipdat Posts: 12,559
    edited April 2018
    How are the MIT Shotguns "problem solved"? Simply because they don't have a split tip?
    Viking64 wrote: »
    MIT Shotguns = problem solved

    I disagree that I'm "over thinking" this, as anyone can replicate the issue/symptom I'm describing with a piece of gear that has this very common type of female RCAs and a split pin RCA cable.

    It just seems nobody else is willing/able to do so. Or nobody cares.
    afterburnt wrote: »
    @Clipdat you are over thinking this. Is there a "groove" ?

  • mlistens03
    mlistens03 Posts: 2,767
    I have had this happen to me before and I don’t buy split tip RCAs because of it.
  • afterburnt
    afterburnt Posts: 7,892
    @Clipdat if there is no groove or notch or something to indicate specific orientation the world is your huckleberry, you can get wild and get crazy in 360 degrees!
  • Clipdat
    Clipdat Posts: 12,559
    Lol finally someone else understands what I'm describing.
    mlistens03 wrote: »
    I have had this happen to me before and I don’t buy split tip RCAs because of it.

  • Viking64
    Viking64 Posts: 6,646
    Clipdat wrote: »
    Lol finally someone else understands what I'm describing.
    He's just placating you because he felt sad for you after your last post.
  • Clipdat
    Clipdat Posts: 12,559
    Are you calling @mlistens03 a liar?!
    Viking64 wrote: »
    He's just placating you because he felt sad for you after your last post.

  • Viking64
    Viking64 Posts: 6,646
    Clipdat wrote: »
    Are you calling @mlistens03 a liar?

    Yes.
  • mlistens03
    mlistens03 Posts: 2,767
    Viking64 wrote: »
    Clipdat wrote: »
    Lol finally someone else understands what I'm describing.
    He's just placating you because he felt sad for you after your last post.

    I am deeply hurt.
    Clipdat wrote: »
    Are you calling @mlistens03 a liar?!
    Viking64 wrote: »
    He's just placating you because he felt sad for you after your last post.

    I think he is.
  • mlistens03
    mlistens03 Posts: 2,767
    Hey, I need your help, I can't figure out how to ignore @viking64. :wink::tongue:
  • Clipdat
    Clipdat Posts: 12,559
    That's the thing, he can't be ignored. Just ask Jesse.
    mlistens03 wrote: »
    Hey, I need your help, I can't figure out how to ignore @viking64. :wink::tongue:

  • Viking64
    Viking64 Posts: 6,646
    mlistens03 wrote: »
    I am deeply hurt.
    I iz sarriez! :'(

    q5j8pphhbw07.jpg

  • mlistens03
    mlistens03 Posts: 2,767
    Clipdat wrote: »
    That's the thing, he can't be ignored. Just ask Jesse.
    mlistens03 wrote: »
    Hey, I need your help, I can't figure out how to ignore @viking64. :wink::tongue:

    Oh great. Well then, moving over to AK, see you all later. :tongue:
    Wait, are you there too!?!
  • mhardy6647
    mhardy6647 Posts: 32,926
    something about pugs...
  • Viking64
    Viking64 Posts: 6,646
    Clipdat wrote: »
    That's the thing, he can't be ignored. Just ask Jesse.

    That's because I am the baddest vampire on this forum! RRRRAAAAARRRRR :p

    l5hf6tzkh558.jpg
  • mlistens03
    mlistens03 Posts: 2,767
    edited May 2018
    Viking64 wrote: »
    Clipdat wrote: »
    That's the thing, he can't be ignored. Just ask Jesse.

    That's because I am the baddest vampire on this forum! RRRRAAAAARRRRR :p

    l5hf6tzkh558.jpg

    aww I can't leave when there are cute pictures like this! :tongue:
    Viking, where on earth do you get all of these pug pictures?
  • Viking64
    Viking64 Posts: 6,646
    mlistens03 wrote: »
    aww I can't leave when there are cute pictures like this! :tongue:
    Viking, where on earth do you get all of these pug pictures?

    MHardy's basement. The place is FLOODED with pug pictures. :p
  • mhardy6647
    mhardy6647 Posts: 32,926
    mlistens03 wrote: »
    Viking64 wrote: »
    Clipdat wrote: »
    That's the thing, he can't be ignored. Just ask Jesse.

    That's because I am the baddest vampire on this forum! RRRRAAAAARRRRR :p

    l5hf6tzkh558.jpg

    aww I can't leave when there are cute pictures like this! :tongue:
    Viking, where on earth do you get all of these pug pictures?


    Some questions are better left unasked.
    Viking64 wrote: »
    mlistens03 wrote: »
    aww I can't leave when there are cute pictures like this! :tongue:
    Viking, where on earth do you get all of these pug pictures?

    MHardy's basement. The place is FLOODED with pug pictures. :p

    Hey! Waitaminute!

    ;)

  • tonyb
    tonyb Posts: 32,902
    Clipdat wrote: »
    Also the issue I described earlier where if you happen to plug it in "just right" (aka wrong), then the internal piece of metal will get inserted between the split tip which just seems awkward and undesirable.

    Then don't use the split pins....see how easy that was ?

    Not sure what answer your looking for, but given all the responses, seems you have a few choices, none may be desirable, but that's called trial and error. Normally one would just plug it in and forget about it....UNLESS there is some deprivation to the sound obviously. Chalk it up to a learning experience and move on, not much else to be done.
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
  • nooshinjohn
    nooshinjohn Posts: 25,034
    After reading this thread I feel as though I have grown much more stupider than I wuz wen I woked up.

    Holicrap, it’s progressing... must get out wile i stil kan....
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
  • F1nut
    F1nut Posts: 49,708
    mlistens03 wrote: »
    Hey, I need your help, I can't figure out how to ignore @viking64. :wink::tongue:

    Congrats, you just joined the class clown and clipdik on my list. Shame, I thought you might turn out ok.....oh well.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • Clipdat
    Clipdat Posts: 12,559
    Yes John, I'm the stupid one, but even resident know it alls Jesse and Ivan didn't know that there were different internal designs of female RCA jacks that cause issues with split pin RCA cables.

    Let's just think about that for a moment.
    After reading this thread I feel as though I have grown much more stupider than I wuz wen I woked up.

    Holicrap, it’s progressing... must get out wile i stil kan....

  • mlistens03
    mlistens03 Posts: 2,767
    F1nut wrote: »
    mlistens03 wrote: »
    Hey, I need your help, I can't figure out how to ignore @viking64. :wink::tongue:

    Congrats, you just joined the class clown and clipdik on my list. Shame, I thought you might turn out ok.....oh well.
    Apparently I’ve been ignored. I’m not quite sure what I did. Can someone enlighten me?
  • Viking64
    Viking64 Posts: 6,646
    mlistens03 wrote: »
    Apparently I’ve been ignored. I’m not quite sure what I did. Can someone enlighten me?
    You made a grown man cry by having a sense of humor. :p