2B's Más Huevos

2»

Comments

  • pitdogg2pitdogg2 Posts: 8,307
    Brian did you spray paint the inside or is that something else you applied? Looks good by the way.
  • pitdogg2 wrote: »
    Brian did you spray paint the inside or is that something else you applied? Looks good by the way.

    Thanks, I brushed on 2 coats of cheap paint from Lowe's.
    The Night is Dark and Full of Terrors
  • pitdogg2pitdogg2 Posts: 8,307
    pitdogg2 wrote: »
    Brian did you spray paint the inside or is that something else you applied? Looks good by the way.

    Thanks, I brushed on 2 coats of cheap paint from Lowe's.

    I just may steal that idea next time i have mine apart.
  • You definitely should
    The Night is Dark and Full of Terrors
  • xschopxschop Posts: 718
    Hey Brian, I guess I should have asked is there even a brace between the midwoofers to measure?

    The repurposed JBL cabs I saw had a thick coat of roofing polymer brushed on the inside.
  • gimpodgimpod Posts: 1,726
    "If you design software that any moron can use only morons will use it." JMO
    ---
    “The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain

    Unfortunately for most of us we only get to experience the first day and then we can't even remember it.
    ---
    "Close only counts in Horseshoes, Hand Grenades and Thermonuclear Weapons."
    "50% Why... That's almost half."
    "I know, I'm sick and need help."
    ----
    www.gimpod.com
    ----
    "The best way to enjoy digital music reproduction is to never listen to good analogue reproduction." ~ Kenneth Swauger
  • xschop wrote: »
    Hey Brian, I guess I should have asked is there even a brace between the midwoofers to measure?

    The repurposed JBL cabs I saw had a thick coat of roofing polymer brushed on the inside.

    Yea there's a 9.25"x9.25"x.75" brace. I beveled down the top edges for a little extra clearance for rings. I wish I'd done something completely different while they were out. But that ship has sailed...
    The Night is Dark and Full of Terrors
  • Well I'm closing in on finishing theses things.
    I made a template at work for these deals I'm using to mount the board.1zzut7b3sul8.jpg
    1zrhb0bd7nwx.jpg
    Mounted the 16mh inductors
    1m0okmrhr7aq.jpg


    The Night is Dark and Full of Terrors
  • txcoastal1txcoastal1 Posts: 8,653
    Clean
    I like the wire wrap and shrink job you did in the cabinets
    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures, Simaudio 780D DAC
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Modwright LS100, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers
  • ken brydsonken brydson Posts: 6,628
    txcoastal1 wrote: »
    Clean
    I like the wire wrap and shrink job you did in the cabinets

    uckmn46fwaet.jpg
    HT/Main- Panny 50" G10 Plasma, Pioneer SC-1222k AVR, Panny DMP-BD60 BDP, Polk LS90 mains, CS350LS center, LS/fx side surrounds, LS50 surround backs, SVS 25-31PC+ sub, Harmony One

    Office Rig- Marantz 2252B, Denon 2910, Kenwood KD2070 TT, Polk RTA 12B's/ RTA8t
  • Toolfan66Toolfan66 Posts: 13,474
    I like the hardware you're using, and I also like the wire wrap, I want you to share that with me..

    I'm not sure I like the paint in the cabinets, I think if it was textured it would look better, but I'm not sure if the texture would change the sound..

    Looking forward to hearing them, and what your thoughts are when you're done with them..
    Even if the whole world knows
    I don't give a damn about what they think
    I don't have to stand up to your gun
    I don't have to sit down when you say
    Tell me I'm overboard
    The truth is you just want to see me sink
    If there's any room left on that ship
    You don't have to save any room for me
    Cause I've got my own boat (even when it rains)
    I'm doing my own thing (even when it rains)
    And I will stay afloat - even when it rains
    Cause I've got my own boat
    Row, row your boat
    Row, row your boat
    Row your boat
  • xschopxschop Posts: 718
    This thread proves the moderators no comprende Espanol.
  • deronb1deronb1 Posts: 4,051
    xschop wrote: »
    This thread proves the moderators no comprende Espanol.

    Huevos are eggs :wink:
  • agfrostagfrost Posts: 2,014
    I'm still looking forward to how the eggs are incorporated--always looking for ways to improve my 2BTL!
    Jay
    SDA 2BTL * Musical Fidelity A5cr amp * Marantz DV-9500 * Modded Adcom GDA-600 DAC
    Micro Seiki DQ-50 * A hodgepodge of cabling * Belkin PF60
    Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
  • "Huevos" in Mexican Spanish (which is mostly slang) refers to having guts or balls.
    The Night is Dark and Full of Terrors
  • agfrostagfrost Posts: 2,014
    ;)
    Jay
    SDA 2BTL * Musical Fidelity A5cr amp * Marantz DV-9500 * Modded Adcom GDA-600 DAC
    Micro Seiki DQ-50 * A hodgepodge of cabling * Belkin PF60
    Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
  • agfrostagfrost Posts: 2,014
    Very cool. Reminds me that I've got a full set of Jantzen inductors to put in place of the stockers.

    May I ask how you secured the SDA inductor to the floor? That's the one detail I haven't worked out yet. (Is that a Northcreek inductor?)
    Jay
    SDA 2BTL * Musical Fidelity A5cr amp * Marantz DV-9500 * Modded Adcom GDA-600 DAC
    Micro Seiki DQ-50 * A hodgepodge of cabling * Belkin PF60
    Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
  • pitdogg2pitdogg2 Posts: 8,307
    I believe could be a Solen. I do not know if Northcreek is making any these days. Price page is gone and inductor page say's "retired2016" at the bottom.
  • They're Northcreek. I bought them off of Larry awhile back.
    I'll take some pics when I get home. Mounting the inductors turned out to be really easy.
    The Night is Dark and Full of Terrors
  • TNTsTunesTNTsTunes Posts: 603
    edited January 8
    agfrost wrote: »
    Very cool. Reminds me that I've got a full set of Jantzen inductors to put in place of the stockers.

    May I ask how you secured the SDA inductor to the floor? That's the one detail I haven't worked out yet. (Is that a Northcreek inductor?)

    Solen makes an air core 16mH 14AWG inductor PN# S1416.0.

    https://solen.ca/products/inductors/standard-inductors-14awg-1-63mm/s1416-0/
    Post edited by TNTsTunes on
    "Make a man a fire and he'll be warm for a day. Light
    a man on fire and he'll be warm for the rest of his life."

  • pitdogg2pitdogg2 Posts: 8,307
    They're Northcreek. I bought them off of Larry awhile back.
    I'll take some pics when I get home. Mounting the inductors turned out to be really easy.

    Interested as well in the way you mounted as well. post up some pictures ;) Yep if I would of read that second picture it says northcreek right on the box lol
  • westmassguywestmassguy Posts: 5,836
    Just make sure the screw or bolt is non-magnetic, either stainless, brass or even aluminum.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Now Carrying Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
  • MrBuhlMrBuhl Posts: 2,042
    2bTL's eres muy guapo!
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel , McCormack DNA 0.5 (SMc Gold) Amp, MFA based Cocci Tube Preamp, Polk SDA2BTL (fully modded), A/L 1000VA Dreadnought, Canare 4s11 SDA cable, Sony S9000ES CD/DVD/SACD, Music Hall mmf 5.1 Turntable, Vincent Pho-700 Phono Pre, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / Pangea & Signal Cable MP power
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000
    LA Toobs Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp, Polk LSIM705, Marantz DV8300 SACD, VPI Nomad Turntable w/Ortofon 2M Bronze, MIT AVt3 Speaker & RCA Cables, Pangea & Signal Cable MP power

    Dodd Mid Level Preamp ("on the bench" w/Charlie)
    Dodd 50W Dual Mono EL34 Amp
    Polk SDA1c modded
    Soundcraftsmen PCR800
    Yamaha YP-D6
    Bottlehead Foreplay (modded)
    Signal Cable Silver Resolution IC's
    Audible Illusions L1 Preamp
    McCormack DNA-1 Power Drive Amp
    Eastern Electric Minimax CDP
    Infinity RS5b Speakers
  • westmassguywestmassguy Posts: 5,836
    Nice Job
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Now Carrying Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
  • Mmmmmm... anodized...bh5bf5pqwuvu.jpg
    The Night is Dark and Full of Terrors
  • pitdogg2pitdogg2 Posts: 8,307
    Mmmmmm... anodized...bh5bf5pqwuvu.jpg

    Man Brian those are super nice binding cups great job on all that. :D
  • agfrostagfrost Posts: 2,014
    So pretty you may want to run the speakers facing the wall. :)
    Jay
    SDA 2BTL * Musical Fidelity A5cr amp * Marantz DV-9500 * Modded Adcom GDA-600 DAC
    Micro Seiki DQ-50 * A hodgepodge of cabling * Belkin PF60
    Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
  • nikoniknikonik Posts: 115
    Órale vato! Those are nice ese.
2»
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!