Wow, they just fell in my lap SDA CRS
Options
CH46E
Posts: 3,547
As I'm sitting at my desk working I get a random text from someone I don't know. its justa picture of a Polk SDA CRS. I ask who it is. The guy tells me he saw one of my adds for my SRS for sale. He said he thought I might be interested. I said sure, how much? He states he can deliver them to me for $50.00 All the drivers are in good shape but one of tha cabinets has the vaneer peeling up.
So I hit the ATM and am waiting on him to bring them to my work. I cant go wrong for $50 right? These have the two tweeters in each not the single.
I almost thought someone was messing with me.
So I hit the ATM and am waiting on him to bring them to my work. I cant go wrong for $50 right? These have the two tweeters in each not the single.
I almost thought someone was messing with me.
Comments
-
Post a pic if you live to do so.
-
I know right! 8 did not ask yet but im sure the cross cable will be missing.
-
-
Man you got robbed lol
Nice score man. That stuff never happens to me -
Just loaded them into the car. No crosscable.
One is rough.
Anyone know how i might go about makeing one a center channel for HT? -
It's called the SDA cable or interconnect cable, not crosscable.
Hook it up as is. The SDA tweeter will not play (a good thing) and the SDA driver will produce sound below 150Hz.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Ok thanks. Since I don't have the crosscable, I will take the SDA tweeters out and use them temporarily in my RTA12B and seal off the hole for the CRS. Should make a better center channel then my current Polk RM7500C. I always thought the vocals were muddy on the RM7500 center. It sure is pretty though in Piano black.
-
... I'm sure the cross cable will be missing.It's called the SDA cable or interconnect cable, not crosscable
lolOk thanks. Since I don't have the crosscable...
Nice acquisition
I disabled signatures. -
It's called the SDA cable or interconnect cable, not crosscable.
Hook it up as is. The SDA tweeter will not play (a good thing) and the SDA driver will produce sound below 150Hz.
Jesse, if that's the case, won't that muddy up male vocals in the lower registers? Please excuse my ignorance as I haven't had the chance to hook up my pair of CRS (identical to the above) to confirm for myself. -
Nice score. Only thing thats delivered here are bills in the mail!
-
It's called the SDA cable or interconnect cable, not crosscable.
Hook it up as is. The SDA tweeter will not play (a good thing) and the SDA driver will produce sound below 150Hz.
Jesse, if that's the case, won't that muddy up male vocals in the lower registers? Please excuse my ignorance as I haven't had the chance to hook up my pair of CRS (identical to the above) to confirm for myself.
Sorry, I can't answer that one.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
I will hook one up tomorrow and see how it does with vocals.
-
It's called the SDA cable or interconnect cable, not crosscable.
Hook it up as is. The SDA tweeter will not play (a good thing) and the SDA driver will produce sound below 150Hz.
Actually, on the 84' CRS, neither the dimensional tweeters or woofers will play with the cable connected. The 2nd generation doesn't have the sub-bass drive circuit.Home Theater/2 Channel:
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
dhsspeakerservice.com/ -
Thank you for the clarification @westmassguy.
-
westmassguy wrote: »It's called the SDA cable or interconnect cable, not crosscable.
Hook it up as is. The SDA tweeter will not play (a good thing) and the SDA driver will produce sound below 150Hz.
Actually, on the 84' CRS, neither the dimensional tweeters or woofers will play withOUT the cable connected. The 2nd generation doesn't have the sub-bass drive circuit.
fixed it fer ya.
-
westmassguy wrote: »It's called the SDA cable or interconnect cable, not crosscable.
Hook it up as is. The SDA tweeter will not play (a good thing) and the SDA driver will produce sound below 150Hz.
Actually, on the 84' CRS, neither the dimensional tweeters or woofers will play withOUT the cable connected. The 2nd generation doesn't have the sub-bass drive circuit.
fixed it fer ya.
TY. Brain Fog.Home Theater/2 Channel:
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
dhsspeakerservice.com/ -
westmassguy wrote: »westmassguy wrote: »It's called the SDA cable or interconnect cable, not crosscable.
Hook it up as is. The SDA tweeter will not play (a good thing) and the SDA driver will produce sound below 150Hz.
Actually, on the 84' CRS, neither the dimensional tweeters or woofers will play withOUT the cable connected. The 2nd generation doesn't have the sub-bass drive circuit.
fixed it fer ya.
TY. Brain Fog.
we got your back. -
Nice to see your posts wmg Mojo Audio Illuminati v3>>Quantum Byte w/LMS>>Rpi/PiCoreplayer>> Starlight 7 USB >> Mojo Audio Mystique v2 SE>>ModWright SWL 9.0 SE Signature>>Hafler DH-500 Amp+ (Musical Concepts Fully Modded)>>
SRS 2.3TL (Fully Modded)...Velodyne Optimum 8 subwoofer
1KVA Dreadnought
Marantz SA 8005
Pioneer PLX-1000 Turntable - Shure SC35C/N35X - V15III/VN35HE
Yamaha TX-540 Tuner...Sony BDP-S570
Sony PS4
Separate subpanel with four dedicated 20 amp circuits.
1. Amplification 2. Analog 3. Digital 4. Video
"All THAT IS LOST FROM THE SOURCE IS LOST FOREVER" -
Nice to see your posts wmg
That man's on vacation, he's got nothin better to do than troll the site now
-
Is it possible to place a jumper on the one speaker? And unplug the sda tweeter.
-
Is it possible to place a jumper on the one speaker? And unplug the sda tweeter.
just unhook the tweeter or take out the fuse if you have one... which I think it should. -
westmassguy wrote: »westmassguy wrote: »It's called the SDA cable or interconnect cable, not crosscable.
Hook it up as is. The SDA tweeter will not play (a good thing) and the SDA driver will produce sound below 150Hz.
Actually, on the 84' CRS, neither the dimensional tweeters or woofers will play withOUT the cable connected. The 2nd generation doesn't have the sub-bass drive circuit.
fixed it fer ya.
TY. Brain Fog.
Your allowed to be foggy, just don't be workin yet....posting yes, working NO!
Just getting a little stir crazy.Home Theater/2 Channel:
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
dhsspeakerservice.com/ -
David, get back to bed!
Whose turn is it to watch you, anyway?!?
[snatches laptop, throws through window]I disabled signatures. -
Some of you were right. I hooked ot up without the crosscable as a center channel and only one driver and tweeter work. It still sounds better than rm7500 center. Vocals are crisp and clear.
-
I certainly wouldn't call it a vacation. I went down a similar path twice this past year and can promise you neither were a vacation. -
-
Some of you may have seen my WTB post for a single RTA11tl crossover. I am thinking about replacing the crs xover with a 11t. I figured it was the closest Polk for the driver complement with a radiator. Ill remove one tweeter and just hook ot up as a 11t to use as a center channel for now. I did not get the crosslink cable with them and one cabs vaneer is in rough shape. Figure down the road ill restore them but for now it would make a nice center with the 11t xover.
What do you guys think? -
Monitor 10, or RTA-11 crossover will work.Home Theater/2 Channel:
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
dhsspeakerservice.com/ -
Hard to impart extreme sarcasm with just Emojis,
Sorry. I still think any by-pass surgery is nothing to joke about.
![[Deleted User]](https://w4.vanillicon.com/40bc09a87daec053937ab0249c85e591_100.png)
![[Deleted User]](https://w6.vanillicon.com/6a3370c17017b3ec2c3ff31b576377bb_100.png)