All the Polk SDA upgrades located in one place!

2

Comments

  • drumminmandrumminman Posts: 3,342
    edited September 2012
    Thank you Trey. I glanced at this am and, as usual, DK did an outstanding job with this. I plan to print it and put it with the rest of my SDA stuff.

    And once again, Thank You, Raife!
  • 2 channel only2 channel only Posts: 16
    edited November 2012
    I have a pair of SDA 1A I need my xovers rebuilt in my pair of speakers, What's your charge ? I e-mailed u early this moring, didn't hear back from you, I 'm just trying to my xovers rebuilt , quite of few people on the forum recommened you , hope to hear from you pretty quick Thanks .
  • VR3VR3 Posts: 21,757
    edited November 2012
    I just now saw this... I did not receive an email unfortunately...

    Vr3Mods@gmail.com

    Thanks!
  • F1nutF1nut Posts: 37,344
    edited November 2012
    I e-mailed u early this moring, didn't hear back from you

    That's one you can do without.
  • michael1947michael1947 Posts: 781
    edited November 2012
    I didn't e-mail you but I thank you for the information. I just downloaded the manual and plan to look into my sda-srs's this winter.
  • VR3VR3 Posts: 21,757
    edited November 2012
    Updated 11/27/12
  • VR3VR3 Posts: 21,757
    edited November 2012
    Just noticed the link at the top does not work...

    Maybe a mod can fix?

    http://vr3mods.com/LCSDAUpgrade.php
  • VR3VR3 Posts: 21,757
    edited June 2013
    Version 3 (HAHA, Vr3) of Ray's SDA compendium has been uploaded!!
  • PolkieManPolkieMan Posts: 2,444
    edited June 2013
    Is there changes do you know what is different ?
    VR3 wrote: »
    Version 3 (HAHA, Vr3) of Ray's SDA compendium has been uploaded!!
  • VR3VR3 Posts: 21,757
    edited June 2013
    I believe it was some minor corrections, perhaps Ray can elaborate further.
  • PolkieManPolkieMan Posts: 2,444
    edited June 2013
    Thanks I really don't want to print and stuff sheet protectors again:eek:
    VR3 wrote: »
    I believe it was some minor corrections, perhaps Ray can elaborate further.
  • MADMAD Posts: 105
    edited July 2013
    Thanks for the links.....

    there really are endless upgrades that you can perform.
    Definitely going to do the tweeters then film caps and resistors
  • jrc56jrc56 Posts: 10
    edited September 2013
    hey is the link listed on top still valid
    For some reason I couldn't connect to it !
  • lbcgavlbcgav Posts: 23
    edited November 2013
    Check out post # 38 above with the new link.
    jrc56 wrote: »
    hey is the link listed on top still valid
    For some reason I couldn't connect to it !
  • TitonineTitonine Posts: 18
    edited January 2014
    Hi there,
    I'm looking for a good pair of SDA speakers in Europe. The choice is difficult and availability is close to zero in my area. I want to understand which model to search... On older SDA models could I upgrade tweeter with the flatter "SL3000" version?
  • Indyaudio2Indyaudio2 Posts: 124
    edited January 2014
    I have a pair of TLs, great reference material, thanks so much. Is the original link broken?
  • hochpt21hochpt21 Posts: 4,667
    edited January 2014
    Yes, I believe there is a proper link later in the thread.
  • VR3VR3 Posts: 21,757
    edited January 2014
    I wonder if Ken would be able to fix it?
  • iliveinyourheadiliveinyourhead Posts: 12
    edited January 2014
    Great info thanks!
  • deafbykhornsdeafbykhorns Posts: 150
    edited May 2014
    I have 4 different brochures if you want me to scan them...
    One is the TL line
    One is S and LS
    One is SDA 1C SDA 2B RTA 11t
    One is complete line during the SDA-SRS 1.2 years along with driver info
  • VR3VR3 Posts: 21,757
    Hey Guys,
    With the forum update - all of the forum links on this page are dead links. Would anyone on the Polk collective be able to transpose the old links to the new?
  • headrottheadrott Posts: 4,946
    That would be absolutely outstanding Trey! I had to buy a new hard drive for my laptop and lost all the downloads I had from your page. I and many others would certainly like to get them. Thanks all.
  • scottiescottie Posts: 10
    Trey, I'm noticing several of the links aren't working correctly, including the link to your site. Although I found it there fine. The links on your site are not all working correctly either. Thanks for the compilation. I have a pair of 2.3s. looking forward to some enhancements.
  • VR3VR3 Posts: 21,757
    Hey Scottie,
    This is on a very very long list of things to do for me. When Polk changed the forum it broke all of the links...
  • scottiescottie Posts: 10
    Once you get to it, it looks like it will take a while. there is a lot of information there :smile:
  • VR3VR3 Posts: 21,757
    This has been updated (the best that I could locate things) -

    http://vr3mods.com/LCSDAUpgrade.php
  • VR3VR3 Posts: 21,757
    I asked Ken to update the first post
  • Nice work. I hope to start some upgrades to my 2.3tl's soon.
  • Vr3 you are awesome!
  • I'm picking up a pair of SRS 3.1's this weekend. Do I need a common ground amplifier to use the interconnect ? I know some don't, how do I know.
2
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!